release.notes.txt

#####################
###  28.7.2014   ###
#####################
Back-end:
- [FIX] #6083 - Web page refresh needed after changing the room of the device

#####################
###  7.6.2014   ###
#####################
Back-end:
- [FIX] #4292 - Mode "auto switch off" has alarm enabled and the alarm is working the same as for the other modes


#####################
###  4.6.2014   ###
#####################
Back-end:
- [FIX] #4381     : According to the REQ document the "switch off light if no motion was detected after"
                    should not be checked when mode "Outdoor light" is selected
- [FIX] #4639     : Mode "Auto switch off" is now properly checking the motion state
- [FIX] #4292     : According to the REQ document alarm should be disabled during the absence in the mode
                    "Auto switch off"
- [FIX] #4392     : The description for the mode "Stairway" are corrected
- [FIX] #4417     : Saving non-existing modes is not possible anymore
- [FIX] #3270     : Additional columns holding the information like timeouts are added
- [FIX] #4361     : Timeout times are now not summed together and scene responder "fade_off" is 
                    executed only on no motion and scene responder "auto_off" responds only on the
                    manual switch. Scene responder "auto_off" performs fading off only in the mode
                    "Auto switch off"


Back-end open items:
--------------------
- issue #4697     : Could not reproduce the problem


Quality:
--------
The basic testing was performed by the developer (no specific test cases were used), just smoke tests.

#####################
###  ?.4.2014   ###
#####################
Back-end:
- [FIX] #3270     : MD modes grid, replaced "Yes" value for "Auto Off"" column with selected time
- [UPGRADE] #3270 : Added column "additional switch off delay"
                    "Only if dark" column replaced "Yes" value with "use position of the sun" or Twilight sensor name

#####################
###  14.11.2013   ###
#####################
Back-end:
- [FIX] #3735 : Removed Preset1 trigger from the fade_off SR 
                and active manual_switch state as trigger from the auto_off SR

#####################
###  8.11.2013   ###
#####################
Back-end:
- [FIX] #3670 : Scope name is set to "motion-detector"
- [FIX] #3554 : We cannot reproduce this bug on any browser with current version
- [FIX] #3649 : Restoring custom MD states on dSS restart, but it takes about 4-5 minutes after restart before "running" event is fetched and executed
- [FIX] #3646 : Partially solved (same as 3670); SR fix re-assigned to Roman

#####################
###  25.10.2013   ###
#####################
Front-end:
- [FIX] #3301: fixed "refresh view" reloading when AKM device is unplugged from dSS
- [FIX] #3441: added "Wait dialog" while saving room mode [in this release SR saving takes more time previously]